Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Hollywood Hills?
Chimney liner replacement in Hollywood Hills typically runs $2,800 to $6,500, while a partial or full chimney rebuild usually costs $4,500 to $15,000 depending on how much masonry has to come down. Most homeowners here land somewhere in the middle: a stainless flexible liner for a standard flue plus a new cap and crown repair often comes in around $3,400 to $4,800. The written estimate is what sets the final price, and we don’t charge for that estimate.
Hollywood Hills is unusual ground for chimney work. The hillside lots, the age of the housing stock, and the way fireplaces were built into slopes in the mid-20th century all change what a liner or rebuild actually involves. A flue that sits dead-straight in a flat-lot house is the easy version. Many homes up here aren’t the easy version.
Key takeaways
- Stainless liner installation: typically $2,800 to $6,500, materials and labor included.
- HeatShield liner restoration (a resurfacing system, not a full reliner): typically $1,600 to $3,200.
- Partial chimney rebuild above the roofline: typically $4,500 to $9,000.
- Full rebuild from the foundation up: typically $10,000 to $15,000.
- Free estimates, and we’ll show you what we found and why it matters before any work starts.
Chimney Liner & Rebuild Cost Breakdown (2026)
These are typical estimated ranges for the Hollywood Hills market in 2026. Treat them as a planning number, not a quote. Every flue gets measured before we price it.
| Line item | Typical estimated range |
|---|---|
| Stainless flexible liner, standard flue | $2,800 – $4,200 |
| Stainless liner, oversized or irregular flue (DuraFlex retrofit) | $3,800 – $6,500 |
| HeatShield liner restoration | $1,600 – $3,200 |
| Insulation wrap around liner | $400 – $900 |
| New chimney cap and crown repair | $450 – $1,200 |
| Partial rebuild, above roofline only | $4,500 – $9,000 |
| Full chimney rebuild, foundation up | $10,000 – $15,000 |
| Firebox repair (masonry or refractory) | $1,200 – $3,500 |
| Damper replacement | $350 – $800 |
| Chimney sweep and inspection | $180 – $350 |
What pushes a job toward the top of those ranges? Access, mostly. A chimney on a steep Hollywood Hills lot may need scaffolding or a lift before anyone touches it, and that’s real cost that doesn’t show up in the liner price. So does flue shape: older homes in this area often have flues that were built by hand and don’t run true, which is exactly the situation where a flexible system earns its keep over a rigid one. A straight, sound, square flue sits at the low end. An offset, oval, or crumbling one sits higher.
The rebuild question runs on the same logic. If the damage is confined to the part of the chimney above the roof, we’re rebuilding that section, not the whole stack. When water has been getting into the masonry for years, the damage often reaches lower than the roofline suggests, and that’s when a partial turns into a full rebuild.
What Affects Chimney Liner & Rebuild Pricing in Hollywood Hills
- Hillside access. A chimney on a downslope lot may not be reachable from a standard ladder placement. When we need scaffolding or a lift, the estimate reflects it. We’ll tell you upfront if your property falls into that group.
- Age and construction of the flue. Mid-century homes in the hills were often built with flues that aren’t perfectly square or straight. That’s where a flexible DuraFlex liner system fits where a rigid liner can’t, and it’s also where labor time goes up.
- Extent of masonry damage. Rebuilding above the roofline is a different job from rebuilding the whole stack. Water intrusion over many seasons is usually the deciding factor.
- Whether restoration is an option. A liner with cracks and gaps but otherwise sound structure can sometimes be rehabilitated with HeatShield rather than replaced outright. That’s a meaningful cost difference, and we’ll tell you honestly when restoration will hold and when it won’t.
- Liner material and brand. We stock professional-grade materials, including DuraFlex, Olympia Chimney, Gelco, Famco, and Copperfield components. The price reflects parts that fit properly and last, not hardware-store substitutes that need replacing in a few seasons.
- Chimney height and cap configuration. Taller stacks mean more material and more time. A damaged crown or missing cap lets water in, so we usually price the cap and crown repair alongside the liner work rather than as a separate visit.
One local factor that surprises people: a fireplace that drafts poorly in a Hollywood Hills home is often a liner problem, not a firebox problem. The flue may be too large for the appliance, or it may be cracked enough that the house is pulling air through the wrong path. Diagnosing that comes before pricing it, which is why we sweep and inspect first and quote second.
Liner Replacement or Rebuild: Which Does Your Chimney Need?
A liner replacement fixes the inside of the flue. A rebuild fixes the structure around it. The two get confused constantly, and the confusion usually costs the homeowner money in one direction or the other.
If the masonry itself is sound, the crown is intact, and the problem is a cracked or missing clay liner, then relining is the answer, and it’s the less expensive one. If the brickwork is spalling, the mortar joints are washing out, or the chimney is leaning, a new liner inside a failing structure is money spent on a problem that will come back. We’ll show you what we found and why it matters, with photos, before recommending either path.
There’s a third option worth knowing about. HeatShield is a certified resurfacing system that rehabilitates a damaged liner from the inside without the cost and disruption of a full reliner. It isn’t right for every flue, but when it fits, it saves real money. We carry it because it’s a genuine repair method, not a workaround.
If you’re still at the stage of figuring out what’s wrong, start with a Carlton Chimney Sweep inspection and sweep. It’s the cheapest way to learn which category your chimney falls into.
How to Save on Chimney Liner & Rebuild
There’s no clever trick that makes chimney work cheap. But there are a few honest ways to keep the number down.
- Fix the cap and crown before the liner fails. Most liner damage we see started as water getting in through a missing cap or a cracked crown. A few hundred dollars now prevents a few thousand later.
- Get the inspection first. Quoting a liner without looking at the flue is guesswork. A sweep and inspection gives you a real diagnosis, and it costs far less than replacing something that didn’t need replacing.
- Ask whether restoration will hold. If HeatShield fits your situation, it’s typically about half the cost of a full reliner. We’ll tell you when it won’t last.
- Bundle the liner and the cap or crown. Doing them in one visit saves the mobilization cost of a second trip.
- Don’t defer the rebuild if the structure is failing. A rebuild deferred for two more winters usually costs more, not less, because the water damage spreads.
Estimates are free, and we’ll walk you through the line items. Call (855) 731-2852 to book one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Local Materials and Local Knowledge Matter Here
Hollywood Hills chimneys were built across several decades, and the construction varies block by block. A liner that fits one house on a street may not fit the next. That’s why we measure every flue and why we stock a range of flexible liner systems rather than one size.
We work with an industry-recognized material lineup: DuraFlex for flexible retrofits in older or irregular flues, HeatShield for restoration, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, ventilation components, and fittings. These are the brands professional chimney guilds rely on. The reason it matters to your wallet is simple: parts that fit correctly don’t come back as a second repair.
We also handle the full arc of the work, from cleaning to diagnosis to structural repair, so you’re not handed off to a second contractor when the sweep finds a problem. And we clean dryer vents too, which is a fire risk most chimney-only companies don’t touch. It’s the same principle: a clean flue, safe home, whether the flue carries smoke or lint.
Safety: Why This Isn’t a Weekend DIY Job
A chimney liner carries combustion gases out of your home, and a failed one lets carbon monoxide into living space. Chimney work also means height, roofs, and in a rebuild, structural masonry. We recommend a trained professional for anything beyond a visual check from the ground. We won’t walk you through relining your own flue, because the margin for error is too thin and the consequence is too serious.
What you can do safely: check from the ground for a missing cap, look for crumbling mortar at the roofline with binoculars, and make sure your carbon monoxide detectors are working. If something looks wrong, that’s the point to call.
Same-Day Repair and What Happens When You Call
Call (855) 731-2852 and we’ll book an inspection, usually quickly. We answer 24/7, and crews dispatch Sunday through Friday, 7am to 7pm. We’re closed Saturday. A call outside dispatch hours is booked into the next opening.
On the visit, we sweep and inspect, then show you what we found with photos and explain the options in plain terms: reline, restore, rebuild, or nothing yet. You get a written estimate with the price per line item. No surprises on the invoice.
If you’re comparing quotes, ask each contractor what liner brand they’re installing and whether they measured the flue. It’s the fastest way to tell a real quote from a guess.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Hollywood Hills?
A chimney liner in Hollywood Hills typically costs $2,800 to $6,500, with most standard flues landing around $3,400 to $4,800. Oversized or irregular flues that need a flexible retrofit sit at the upper end. Call (855) 731-2852 for an exact quote; estimates are free.
How much does a chimney rebuild cost in Hollywood Hills?
A chimney rebuild runs $4,500 to $9,000 for the section above the roofline, and $10,000 to $15,000 for a full rebuild from the foundation up. The deciding factor is how far water damage has reached into the masonry. Call (855) 731-2852 and we’ll tell you which one your chimney actually needs.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when it’s an option. HeatShield liner restoration typically costs $1,600 to $3,200, compared with $2,800 to $6,500 for a full reliner. Restoration only holds when the surrounding structure is sound, so the inspection decides it. Call (855) 731-2852 for a free estimate.
Can you come today?
Often, yes, same-day service is available. We dispatch Sunday through Friday, 7am to 7pm, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 731-2852 and we’ll find you a slot.
Does a chimney rebuild include a new liner?
Usually, yes, and the estimate should say so. A rebuild typically runs $4,500 to $15,000 and includes relining the flue as part of the job, since putting new masonry around a failed liner wastes the work. Ask any contractor to confirm this in writing. Call (855) 731-2852 for a free estimate that spells it out.
Get a Free Estimate
If you’re in Hollywood Hills and your chimney needs a liner or a rebuild, the first step is a look at the flue. Call (855) 731-2852 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll show you what we found, explain why it matters, and give you a written price before anything starts.
Pricing reflects the Hollywood Hills market as of 2026. Carlton Chimney Sweep offers free estimates – call (855) 731-2852. Written by the team at Carlton Chimney Sweep, serving Hollywood Hills since 2015.
What Our Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Javier Hernandez"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Megan Parker"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Jeff Lawson