Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Hollywood Hills?
A chimney cap in Hollywood Hills typically runs $185 to $480 installed, and crown repair or rebuild usually falls between $350 and $1,400, depending on how much of the crown has cracked. A full crown pour on a single flue generally lands in the $650 to $1,100 range. Those are estimates for planning, and the written estimate we leave you with sets the final price.
We’re Carlton Chimney Sweep, and we handle both the cap and the crown on the same visit. Caps and crowns fail together more often than people expect, because both take the same sun and the same dry air. If your cap is rusted through or your crown has a hairline crack running to the edge, it’s worth knowing what the fix runs before the next rainy season finds it.
Key Takeaways
- Caps: $185 to $480 installed, most jobs on the lower half of that range.
- Crown repair (sealing cracks): $350 to $700.
- Crown rebuild with a fresh mortar pour: $650 to $1,400.
- Custom or oversized caps for irregular flues cost more than stock caps.
- Estimates are free, and we’ll show you what we found and why it matters before anyone touches a tool.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down by line item for the Hollywood Hills market. These are typical ranges, not a quote. The written estimate you receive after we look at your flue is the number that counts.
| Item | Typical Range (Installed) |
|---|---|
| Standard single-flue cap (stock size) | $185 – $280 |
| Multi-flue cap | $280 – $480 |
| Custom-fit cap for an irregular or oversized flue | $380 – $620 |
| Crown inspection and crack sealing (minor) | $350 – $550 |
| Partial crown repair (chipped or spalled edges) | $500 – $700 |
| Full crown rebuild, single flue | $650 – $1,100 |
| Full crown rebuild, multi-flue or complex shape | $1,100 – $1,400 |
| Cap and crown done on the same visit | Often $100 – $200 less than the two line items added together |
What pushes a job up? A crown that’s lost its bond to the flue and needs to come off is more work than one with a few surface cracks. Multi-flue chimneys cost more because there’s more surface area to pour and more caps to set. And a flue that isn’t square or isn’t quite the size the stock cap assumes means a custom cap, which sits higher on the range.
What keeps it down? A cap that’s just missing or rusted, on a standard round or square flue, is one of the quicker jobs we do. And if the crown is still sound, you’re paying for a cap alone. Our cap and ventilation components come from Famco and Gelco, the kind of parts with precision fit and weather durability built in, not a hardware-store substitute that rusts through in two seasons.
What Affects Chimney Cap & Crown Pricing in Hollywood Hills
Hollywood Hills has its own set of conditions that shape these numbers, and they’re not the same as a flat-roof job downtown or a house in the flats. Here’s what actually moves the price.
- The sun and the dry air. Southern California’s long dry stretches are hard on masonry. A crown spends most of the year baking, then gets one hard rain. That cycle cracks mortar at the joints. A crown with a few surface checks is a sealing job; one that’s cracked through to the flue needs rebuilding.
- Sloped lots and hillside rooflines. Many Hollywood Hills homes sit on a grade, and the chimney isn’t always where a ladder sets up easily. Access that takes longer adds labor. If your roofline is steep or the chimney sits off a slope, expect the higher end of the range.
- Chimney height and shape. Tall chimneys and multi-flue stacks need more material and more time. Irregular flue sizes are common in older hillside homes, which means a custom cap.
- Crown material. A standard mortar crown is the baseline. Reinforced crowns with better drainage design last longer and cost more up front. Ask us about the trade-off when we estimate.
- What’s underneath. If a crown has failed, water’s been getting in. Sometimes the crown is the whole story. Sometimes the flashing or the flue liner needs attention too, and we’ll say so before you commit to a repair.
- Combining cap and crown. Doing both in one visit saves on setup and access, and that shows up in the number. It’s usually the smarter call if the crown is already cracked.
One local note: the dry climate here means a lot of caps rust from the inside out rather than rotting from rain. The cap on a chimney that hasn’t been looked at in years is often a thin, failing shell, and a rusted cap lets water and animals straight into the flue. That’s why we check the cap every time we do a sweep.
How to Save on Chimney Cap & Crown
There’s no coupon here, just a few honest ways to keep the number down. The biggest one is timing: a crown sealed while the cracks are still small costs a fraction of a rebuild, and sealing is a much smaller bill than the full pour.
- Fix the crown before the cap. If the crown is cracked, seal it before the crack runs to the edge. Once water is working its way in, the repair gets bigger.
- Get both in one visit. Bundling the cap and crown on the same trip drops the total. Setup and access are the same either way.
- Ask about a custom cap once, not twice. If your flue is irregular, a stock cap that doesn’t fit right will leak and get replaced. A custom-fit cap is more up front and less over time.
- Take the free estimate seriously. A written estimate tells you exactly what’s cracked and what isn’t. It also keeps you from paying for a crown rebuild when sealing would do. Call (855) 731-2852 and ask for the estimate.
We work with professional-grade materials on every job: DuraFlex flexible liners for retrofits in older or irregular flues, HeatShield liner restoration, and Olympia Chimney, Copperfield, Famco and Gelco components. If a repair calls for a liner, we’ll show you why. If it doesn’t, we’ll tell you that too.
Does a Chimney Cap Come With a Crown Repair?
Not usually, and it’s worth knowing the difference before you get a bill. The cap is the metal or mesh cover at the top that keeps water, birds and debris out of the flue. The crown is the concrete or mortar cap on top of the masonry that sheds water off the chimney itself. They’re separate parts with separate jobs, and a job can need one without the other.
That said, they fail for some of the same reasons, so they often need attention on the same visit. When we’re up there for a crown repair, we check the cap while we’re at it. That’s simply part of the visit, and it’s how we avoid handing you a second trip later. If both need work, doing them together is almost always the cheaper way to go.
Should You Repair or Rebuild a Cracked Crown?
Repair if the crack is narrow and the crown is still attached to the flue. Rebuild if the crown has spalled, separated, or cracked through to the edge. A sealing job usually runs $350 to $700. A rebuild runs $650 to $1,400, so the question is whether the existing crown can hold mortar and shed water for another decade.
Here’s how we decide. We look at whether the crown is still bonded to the top of the flue, how deep and where the cracks run, and whether water has already reached the masonry below. A crown with a single hairline crack that hasn’t spread gets sealed. A crown that’s crumbling at the edges or has pulled away from the flue gets rebuilt, because sealing a crown that’s no longer attached is money wasted. When we do a rebuild, we pour a fresh crown with the right slope so water runs off instead of sitting. We’ll show you what we found and why it matters, then give you the written estimate.
Is a Chimney Cap Worth the Cost in Hollywood Hills?
Yes, and it’s one of the least expensive safety items on a home. A cap in the $185 to $480 range keeps rain, birds, squirrels and leaves out of the flue, and it keeps sparks where they belong. The alternative is water in the flue, and water in a masonry chimney leads to bigger bills than a cap.
Caps also matter for animals. Hollywood Hills has coyotes, raccoons, squirrels and plenty of birds, and a flue with no cap is an open door. A nest in the flue blocks the draft, and that’s a chimney problem turning into a house problem. We’ve seen a flue packed with debris cost far more to clear and repair than a cap ever would have. A clean flue and a capped flue are the two simplest things you can do for a safe fireplace. If you want to start there, the Carlton Chimney Sweep team handles cap and crown work on the same visit as the sweep.
Chimney Safety and When to Call a Professional
Crown and cap work happens on the roof, at height, on tile and sometimes on a steep pitch. That’s a job for people with the right ladders, the right roof access and the insurance to be up there. We don’t recommend climbing onto a Hollywood Hills roofline to check your own crown. What you can do from the ground is look with binoculars for visible cracks, missing caps or crumbling mortar, and call if you see something. We’ll take it from there.
While we’re on the roof for a crown, we look at the flue, the flashing and the cap together. If we find a problem outside cap and crown work, we tell you plainly rather than upselling. That’s the whole point of having the sweep, the diagnosis and the structural repair under one roof: you don’t get handed to a second contractor mid-problem. The full service arc is cleaning, inspection and repair, and we handle all three.
Our brand lineup is the same one professional chimney guilds rely on: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. HeatShield, in particular, lets us restore a damaged liner surface without the cost and disruption of a full reliner, which is worth knowing if your crown leak has reached the flue.
Chimney Cap & Crown FAQs – Hollywood Hills Pricing
How much does a chimney cap cost in Hollywood Hills?
A chimney cap in Hollywood Hills costs about $185 to $280 for a standard single-flue stock cap installed, and $280 to $480 for a multi-flue cap. Custom caps for irregular or oversized flues run $380 to $620. Call (855) 731-2852 for an exact quote, and estimates are free.
How much does it cost to repair a chimney crown in Hollywood Hills?
Chimney crown repair in Hollywood Hills runs about $350 to $700 for sealing cracks or repairing spalled edges, while a full crown rebuild runs $650 to $1,400 depending on flue count and shape. The written estimate sets the final price. Call (855) 731-2852 to get one.
Can you install a cap and repair the crown on the same visit?
Yes, and it’s usually the cheaper way to do it. Doing both on one visit often saves $100 to $200 over two separate calls, because the roof access and setup only happen once. One visit, one estimate, one bill. Call (855) 731-2852.
Is a chimney cap worth the money in Hollywood Hills?
Yes. A cap in the $185 to $480 range keeps rain, birds and debris out of the flue and keeps sparks contained. Water in a masonry chimney leads to repairs that cost more than the cap ever would. Ask us about it when we’re on the roof for the estimate. Call (855) 731-2852.
Does a cracked crown mean my chimney is unsafe?
Not by itself, but it deserves a look. A cracked crown lets water into the masonry, and over time that damages the flue and the structure around it. A narrow crack that hasn’t spread is usually a sealing job. A crown that’s separated or crumbling needs a rebuild, and we’ll tell you which one yours needs after we see it. Call (855) 731-2852 and we’ll take a look.
Get a Free Chimney Cap & Crown Estimate in Hollywood Hills
If your cap is rusted, your crown is cracked, or you’re not sure either way, the estimate is free and the answer comes with a written number. We handle the sweep and the fix, from the cap to the crown, and we’ll show you exactly what we found and why it matters before any work begins.
We also clean dryer vents, because a clogged dryer vent is a household fire risk most chimney-only companies don’t touch. A clean flue and a clear dryer vent both start with a look from someone who knows what to look for. For homes across the hills, our Hollywood Hills work covers chimney sweeps, structural repair and ventilation in one visit.
Call (855) 731-2852 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call that comes in outside dispatch hours is booked into the next opening. Carlton Chimney Sweep has served homeowners since 2015, and we’ll show you what we found and why it matters, so you can decide with the numbers in front of you.
Written by the team at Carlton Chimney Sweep, serving Hollywood Hills since 2015. Pricing reflects the Hollywood Hills market as of 2026. Carlton Chimney Sweep offers free estimates – call (855) 731-2852.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Megan Parker"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Jeff Lawson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Michelle Kim