Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Beverly Grove, CA
Chimney repair in Beverly Grove usually means working on a 1920s or 1930s home whose original clay flue tiles are still in place, often behind stucco and tile roofing that hides problems until a Santa Ana wind event or the first fire of the season brings them to light. We’re Carlton Chimney Sweep, and we handle cleaning, diagnosis, and structural repair so Beverly Grove homeowners don’t get handed off to a second contractor mid-problem. If you’ve noticed loose soot around the hearth or a draft that pushes smoke back into the room, call (855) 731-2852 and we’ll take a look with a camera before recommending anything.
Why Beverly Grove Homes Are Different
Beverly Grove’s chimney work is defined by 1920s and 1930s Spanish Colonial and Tudor homes with original clay flue tiles. These tiles were good for their era, but they crack and separate over time, and because Beverly Grove fireplaces get used only a few nights per year, creosote builds up slowly and goes unnoticed. The warm, dry climate means the creosote stays dry and highly flammable, which is a different risk profile than you’d find in a wetter climate where moisture keeps it pasty and less volatile.
Then the Santa Ana winds arrive. We regularly find nests and debris blown into chimney caps and flues after a wind event, and the downdrafts those winds create can dislodge loose soot and push it into living spaces. Unlike neighboring West Hollywood, Beverly Grove’s dense single-family blocks often have chimneys hidden behind stucco and tile roofs, making inspection and cleaning a specialized, access-sensitive job. Many of these homes have been renovated with modern inserts, but the original undersized lining often remains, creating a mismatch between the new appliance and the old flue. That’s the core of most repair work we do here.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Beverly Grove Services
Most Beverly Grove homeowners call us for one of two things: a thorough cleaning and inspection of a fireplace they haven’t used since last winter, or a dryer vent that’s been quietly building lint behind the wall. Here’s what each involves.
Chimney Sweep in Beverly Grove
Our Chimney Sweep in Beverly Grove service is built around the way these older homes actually behave. We remove the creosote and soot that build up in original clay tile flues, inspect the liner with a camera, and check the cap and crown for the kind of storm and wind damage that Beverly Grove’s Santa Ana season brings. Every sweep includes a photo report so you can see what we saw. Because access is often tight on these stucco and tile-roofed houses, we bring the right roof ladders and walk boards rather than improvising around your landscaping.

Dryer Vent Cleaning in Beverly Grove
Your dryer vent is a fire risk too, and in a Beverly Grove home with a long interior vent run it’s a risk that builds slowly and silently. Our Dryer Vent Cleaning in Beverly Grove service clears the lint that restricts airflow, forces your dryer to work harder, and in the worst case can ignite. Older Beverly Grove houses often have vents that run long horizontal distances through walls or crawlspaces, which collect more lint than short, direct runs. We clean and inspect the full run and show you the buildup we removed.

Chimney Repair in Beverly Grove
Chimney repair in Beverly Grove generally targets the original clay tile liners and masonry that have held up for 80 to 100 years. The dry climate preserves brick and mortar surprisingly well, but the flue tiles take the direct heat of every fire, and after decades they crack, spall, or separate at the joints. When the Santa Ana winds push hard against those hidden chimneys, loose material inside the flue gets knocked around, and gaps that were once harmless become pathways for heat and carbon monoxide. The fix depends on what the camera shows. Sometimes it’s a new cap or crown; sometimes it’s a full Chimney Repair with a reliner or HeatShield resurfacing. We handle the sweep and the fix together, so the repair decision is based on evidence you can see, not a sales pitch.
Chimney Cap Installation
Signs you need it
If you see twigs, leaves, or bird activity near the flue opening after a Santa Ana event, or water staining inside the firebox after a rare rain, your cap is missing or failing.
What it costs in Beverly Grove
Chimney cap installation in Beverly Grove typically runs $300 to $700, depending on the flue size and whether we need to custom-fabricate a bracket for an irregular tile crown.
How we do it
We measure the flue, select a stainless Famco or Gelco cap sized for your chimney, secure it to the crown with proper hardware, and test the draft to confirm airflow is unchanged.
Chimney Liner Installation
Signs you need it
Cracked or spalling clay tiles visible during camera inspection, smoke backing up into the room, or a gas appliance venting into a flue that’s too large for it all point to liner work.
What it costs in Beverly Grove
Chimney liner installation in Beverly Grove typically runs $1,900 to $4,000 for a stainless DuraFlex liner system sized and fitted to your existing flue.
How we do it
We inspect the flue with a camera, size the correct DuraFlex liner, feed it down through the existing tile flue, insulate where needed, and connect it to the appliance or fireplace with a proper top plate and cap.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney chase, damp plaster around the fireplace wall, or visible gaps and lifted metal at the roofline all signal flashing failure.
What it costs in Beverly Grove
Chimney flashing repair in Beverly Grove typically runs $350 to $800, depending on how much of the existing flashing is salvageable and whether we need to cut back stucco or tile to reach it.
How we do it
We remove the failed flashing, install new step and counter flashing with proper overlap, seal the transition with professional-grade sealant, and test for water-tightness before we leave.
Chimney Crown Repair
Signs you need it
A cracked, spalled, or missing crown lets water run into the masonry and flue, usually showing up as spalling brick or water staining near the top of the chimney.
What it costs in Beverly Grove
Chimney crown repair in Beverly Grove typically runs $300 to $650 when we can fill and seal the existing crown, which is the norm on these older homes where the crown is usually concrete over masonry.
How we do it
We assess the crown’s condition, grind and clean the surface, apply a proper crown repair compound with a slight slope for drainage, and seal the edges to prevent water from tracking into the brick.
What Chimney Repair Costs in Beverly Grove
| Item | Typical range in Beverly Grove |
|---|---|
| Chimney cap installation | $300 – $700 |
| Chimney liner installation | $1,900 – $4,000 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $300 – $650 |
How much does a chimney liner cost in Beverly Grove?
A new stainless liner in Beverly Grove typically runs $1,900 to $4,000 installed. The final price depends on flue height, existing tile condition, and whether we’re lining a fireplace or a gas appliance. Call (855) 731-2852 for an exact quote, free of charge.
Do I really need a new liner, or can it be repaired?
If the damage is limited to surface cracks and failing joints, HeatShield resurfacing can often rehabilitate the original liner without the cost of a full reliner. We’ll show you camera footage before recommending either path. Call (855) 731-2852 and we’ll explain what we’re seeing.
Brands We Service in Beverly Grove
We install and service professional-grade chimney components from HeatShield, Gelco, Olympia Chimney, and Famco. These are the same brands certified chimney professionals rely on, not hardware-store substitutes. When we quote a repair in Beverly Grove, we know what’s in stock locally and can usually source anything else within a day or two. Our brands are chosen because they last.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Beverly Grove, CA
| Service | Typical range in Beverly Grove |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney cap installation | $300 – $700 |
| Chimney cap replacement | $300 – $700 |
| Chimney liner installation | $1,900 – $4,000 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $300 – $650 |
| Dryer vent cleaning | $150 – $300 |
Access is the main factor that pushes cost up in Beverly Grove: chimneys hidden behind tile roofs, tight side yards, and stucco that has to be cut back to reach flashing all add time. The estimate you get is the price you pay, and we set it in writing before any work begins.
Neighborhoods We Serve in Beverly Grove
Beverly Grove is a compact residential grid between Fairfax and La Cienega, and we work in every part of it. Most jobs are single-family detached homes, but we also handle the older duplex and triplex stock. Response time across Beverly Grove is typically the same day or next morning, depending on when you call.
- Carthay Square
- South Carthay
- Beverly Grove’s east side near Fairfax
- The blocks around The Grove
- The residential streets west of San Vicente
Service Area – Cities Near Beverly Grove
We serve Beverly Grove and the surrounding Los Angeles neighborhoods, including Hancock Park, CA, La Brea, CA, Miracle Mile, CA, and Beverly Hills, CA. If you’re just outside Beverly Grove, call us and we’ll confirm coverage and get you on the schedule.
Serving Beverly Grove, CA – Our Local Coverage Area
We serve Beverly Grove and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Beverly Grove
We answer 24/7 and dispatch crews from 7am to 7pm, Sunday through Friday. If you call in the morning, we can usually have someone to your Beverly Grove home the same day. Call (855) 731-2852 and we’ll tell you what’s available.
Most repair work, including cap replacement, crown repair, and liner installation, doesn’t require a permit, but structural masonry changes might. We’ll tell you if your job falls into that category before we quote, so there are no surprises with the city.
We do. Some of the older multi-unit properties in Beverly Grove have HOAs that require approval before exterior chimney work. We can provide the photos, specs, and written estimate your board needs, and we’re happy to answer their questions directly.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Grove Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Nicole Rhodes"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Nisha Patel"Second time using them. Same guy, same good work."
- Michael Delaney